Epica Clear 2.5Ml Menicon
¥1436
A proteolytic enzyme cleaning solution for the Epica series. In principle, when used once a week in combination with Epica Cold or Epica Heat, it disinfects and simultaneously performs protein cleaning, effectively removing protein stains attached to the lens.
Ingredients/Amount
＜Principal component＞
Proteolytic enzyme
Usage and dosage
Before handling lenses, wash your hands with soap and rinse thoroughly with tap water (the same applies below).
○When used with Epica Cold
1. Press the button on the bottom of the Epica Clear body and put two drops into the left and right lens cases to fill the Epica Cold.
2. Remove the lens from your eye, place it in your palm, apply a few drops of Epica Cold, rub both sides of the lens 20 to 30 times with your fingers, and rinse thoroughly with Epica Cold.
3. Place the rinsed lens into the lens case and tighten the cap. Leave it on for at least 4 hours.
4. After disinfecting, rinse the lenses thoroughly with Epica Cold before wearing them.
*Empty the lens case after use, rinse it with Epica Cold, and let it air dry.
○When used with Epica Heat
1. Press the button on the bottom of Epica Clear, place one enemy in each lens case on the left and right, and fill Epica Heat up to the water level.
2. Remove the lens from your eye, rinse with Epicaheat for 5 to 10 seconds to remove dirt, and then place the rinsed lens in the lens case.
3. Tighten the cap of the lens case and sterilize it with a heat sterilizer (epilizer).
*Please check that the pilot lamp is lit. Thermal disinfection will be completed in about 1 hour.
4. After disinfecting, rinse the lenses thoroughly with Epicaheat before wearing them.
*Empty the lens case after use, rinse it with tap water, and let it air dry.
Dosage form/shape
Liquid
Contact information
Menicon Co., Ltd.
1-3-12 Misakicho, Chiyoda-ku, Tokyo
03-5283-3101
Product size
Height 78mm x Width 32mm x Depth 23mm
| Dimensions | 2.3 × 3.2 × 7.8 cm |
|---|---|
| Manufacturer |
Menicon |
